Mohammed AlShuilly

• Drilling Engineer KCA Deutag for clint PDO (May 2018 – Present)
• During this period, I earned experience in  normal drilling operations such as Drilling, RIH CSG, Cement jobs, liner setting, RIH completions, BOP pressure tests and function tests , following directional drilling trajectory and QA/QC of surveys …ect. 
• Worked in different fields in Oman drilling oil development wells with different well designs.  Prepare CSG and completion tallies. Responsible for ordering required materials and service companies. Following-up costs and tickets. Writing daily operation reports, CSG report, cement report, completion and wellhead reports , stimulation reports..ect. Supervising and preparing calculations for cement jobs ( primary, cement plugs, squeeze cement ). 
• Ensuring that every equipment entering well is measured.
• Ensuring specifications of any equipment delivered to rig-site are aligned with company standards
• Ensured that well is drilled and completed in safely, with company required quality and considering cost.
• Preparing kill sheet, Margin of overpull sheet. Follow-up trip sheet with drilling team.
• Ensured competency of crew and increase their fast thinking during critical operations by doing drills.
• Preparing daily written working instructions and ensure all involved parties have instructions and understand them clearly.
• Ensure all equipment in Rig-site are certified ( COC, COS …) and inspections are done as planned.
• Coach and train people in daily manner to ensure that they understand associated hazards and mitigations involved in operation.
• Lead Pre-job safety meetings. 
• Worked as script  during emergency and helped OSC in ensured people are properly managed , evacuated, well is secured , town people are informed using proper communication protocol and required personnel to control scene are on-site.  
• Ensured that rig contractor had valid temporary pipe work register with required details of inspections. 
• Worked with DSV to ensure all barriers are verified and tested during each stage of well construction. 
• Do 15 daily well control checklist to ensure all BOP control panels are working properly, all pressures in koomey unit are in acceptable range, air and electrical pumps are working and alarms are working. Ensure required FOSV and gray valve are available at rig-floor with required X-overs.

• Drilling Fluid Engineer for Arabian Drilling company (Feb 2014 – May 2017)
• Prepare drilling fluid with required specification ( MW, rheology ,fluid losses, filter cake, PH, required inhibition .. ect) as per total fluid management in program. 
• Ensure that required chemicals are on-site to keep drilling fluid as per required specifications.
• Prepare different types of LCM pills to cure losses. 
• Ensured that cement mix fluids are as per cement recipe requirement, mixing chemicals as per calculations with required sequence.  
• Report any abnormality in shale shaker such caving..ect.
• Perform tests on mud and report daily in drilling fluid report.

• Field Operator ,Exterran Middle East (Feb 2013 – Feb 2014)
• Sustain plant equipment and ensure units outputs as per requirement of control unit.
• Report abnormality to control room and maintenance team.

• Well Site Geologist ,MB Petroleum Services(May 2010 – Feb 2013)
• Analyze cutting samples and perform various testes to determine formation and formation lithologies. 
• Correlate formation prognosed depth with actual drilled cuttings and report data to drilling team.
• Evaluated and Interpreted rock cuttings and field samples to determine presence and composition of natural resource reserves. 

I have long experience in oil and gas well, I worked in different vectors like in geology, mud fluids and drilling engineering 

Education 

Bachelor of Water Engineering

September 2000- May 2006, Sultan Qaboos University